Case Study Category: Residential
-
Read Article9.4kWp Domestic Installation in Swanmore
Solar Voltaics recently completed a high-efficiency residential solar PV and battery storage system designed to significantly reduce the homeowner’s energy bills and carbon footprint. The installation features cutting-edge components to ensure maximum performance and long-term reliability. System Specifications 20 x Aiko 470W solar panels – Renowned for their high efficiency and superior build quality, these
-
Read Article5.22kW system in Waterlooville
At this property, we installed a solar PV and battery system at the same time that the customer was having an air source heat pump installed. The customer wanted the property to be powered in the event of an outage and had a family member that we had already installed a GivEnergy All-in-One for.
-
Read Article6.53kW system in Hedge End
This customer wanted as much solar as the roof space would allow. We managed to use Tigo Optimisers to allow us to install solar panels on 2 south facing roofs, and an East and a West. The roof was tiled with concrete tiles and the total roof space allowed 15 panels in total.
-
Read Article7.83kW system in Yapton
This customer had bought a new build property that already had an air source heat pump. They wanted to boost the ecofriendliness of their new home by installing solar and a battery. The property had a grey concrete tile roof and an East/West orientation. The system comprises of: 18 x Jinko 435w solar
-
Read Article
3.72kW system in Portsmouth
This customer wanted to generate as much solar energy as possible on a South facing roof with limited space so we chose to use some higher output panels to maximise the space. The system comprises of: 8x Aiko 465w solar panels GivEnergy 5kW inverter GivEnergy 5.2kWh battery Bird mesh Clenergy mounting system The system should
-
Read Article4.35kW system in Soberton
This customer could not have solar on their house, but had a garage that had good space. The only issue was that the roof was angled towards North, rather than South. We designed a mounting system to reverse the pitch of the garage roof to help the panels point in a southerly direction to
-
Read Article6.09kW system in Alton
This customer had a large dormer window in the centre of their South West facing roof, but we designed a system that would fit above and below the dormer with the panels in landscape orientation. There was also space on the garage roof which was flat that we were able to utilise as well.
-
Read Article7.83kW system in Whiteley
This customer had an East/West roof and wanted as much solar as we could fit on the concrete tiled roof. They also wanted an iBoost solar diverter to send any excess solar to the hot water tank to heat their water. The system comprises of: 18x Jinko 435w solar panels GivEnergy 5.0kW hybrid
-
Read Article4.79kW system in Portsmouth
This customer in Portsmouth had viable South and West facing roofs tiled with concrete tiles. The customer wanted a PV only system so they could claim export payments for any excess solar they exported. The system comprises of: 11x Jinko 435w solar panels Growatt 4200w string inverter Clenergy mounting system Bird protection
-
Read Article7.83kW system in Petersfield
We initally quoted this customer for a single phase system. We gave them 2 options between the Tesla Powerwall or the GivEnergy hybrid system. However the customer actually decided to have his incoming supply upgraded to a three-phase supply. We therefore requoted for a GivEnergy three phase hybrid system which was fairly new out
-
Read Article9.57kW and 6.09kW system in Alton
This project was something slightly different as it was on the same site as a commercial job that we also completed. The owners of Garthowen Garden Centre in Four Marks had an installation on their garden centre and also on their house on the same site. They had two incoming supplies in the house so
-
Read Article2.64kW system in Emsworth
This customer had a small flat roof at the top of their town house. It was a unique roof that also had a parapet surrounding it, which unfortunately meant some shading. We wanted to maximise the solar we could get on the roof while minimising the risk of shading. The system comprises of: