- Solar Panel Installation
- Solar Maintenance
- Solar Products
- EV Charging
- Battery Storage
Generate Free Hot Water From Your Solar Panels
SolarSaver™ automatically re-directs excess solar power not being used in your home to heat your hot water for free – saving on your normal fuel costs. Use your boiler as a back-up, or switch it off altogether in the summer!
How it works
SolarSaver™ is designed to be used with immersion heaters and measures how much power is flowing in or out of your property and how much solar energy is being generated. Only when you begin exporting electricity will it start to turn on the immersion heater – always adjusting the exact level to use all available solar energy without drawing any power from the grid. You can turn electric appliances on and off in your house without worrying about it; make a cup of tea and SolarSaver™ turns down the immersion heater as soon as you switch your kettle on and turns it up again afterwards. The unit requires no programming; even the internal clock sets itself.
The SolarSaver™ has a clear colour display showing key generation and consumption power levels. There is a manual overide and if you are on economy 7, SolarSaver™ can also provide a night boost if required.
The example below shows typical energy use and generation for a home on a sunny day with a 4kW solar PV system .
• The house used 14kWh over 24 hours.
• 7 kWh of energy used came from solar power.
• The PV system generated 21 kWh of energy, of which 14kWh was not used (and went into the grid).
• That means that 14 units of energy could have been used to heat hot water – that’s enough to run an immersion heater for 5 hours!
If you have an existing solar PV system, a hot water tank and immersion heater, it should be possible for us to install a SolarSaver™ for just £695 inc parts, labour and VAT. Payback depends on hot water use but is typically within 2 – 5 years.
Heat Your Hot Tub in the Summer for FREE!
Hot Tubs typically cost £30 – £50 per month to heat. We can programme the
SolarSaver™ controller to heat your Hot Tub with your surplus solar energy.
By installing a SolarSaver™ device, the water heater for your Hot Tub can be configured to only utilise spare energy from your solar PV system.